www.vishay.com for technical questi ons, contact: tantalum@vishay.com document number: 43005 1 revision: 12-sep-07 tc vishay sprague subminiature, leaded solid tantalum capacitors polar or non-polar features ? subminiature package size and light weight ? rectangular case with axial or radial leads ? 2 to 50 vdc ? 0.1 f to 470 f ? operating temperature range: - 55 c to + 125 c ? high stability and reliability ? tested in accordance with mil-prf-49137 ? unique and comprehensive custom design capability electrical characteristics operating temperature range: - 55 c to + 125 c capacitance: measured at 120 hz and 25 c with a maximum of 2.2 vdc bias and 1.0 v rms signal. capacitance tolerance: standard tolerance is 20 % for ratings 0.1 f and above, and + 40, - 20 % for ratings below 0.1 f. special tolerances are also available. dissipation factor: when measured simultaneously with capacitance, df shall not exceed the value shown in theratings tables. dc leakage current (dcl max): when measured with dc voltage applied through a 1000 resistor for 5 minutes, dc leakage (a) shall not exceed: at 25 c: leakage current shall not exceed the values listed in the standard ratings tables at 85 c: leakage current shall not exceed 10 times the values listed in the standard ratings tables at 125 c and 66 % of rated voltage: leakage current shall not exceed 15 times the values listed in the standard ratings tables. operating voltage: full working voltage up to 85 c. from 85 c to 125 c working voltage derates linearly to 66 % of the 85 c working voltage. applications ? hearing aids ? portable communications ? space/avionics ? laptop computers mechanical specifications solder coated nickel leads (t ype n32 per mil-std-1276) are standard on all case sizes. leads are weldable and/or solderable. special leads are available on request (e.g. bare nickel, gold plated nickel or ribbon leads). lead length is 1 1/2? [38.1 mm] minimum on nonpolar parts. on polar parts the negative lead is 1-1/4? [31.8 mm] minimum and the positive lead is 1-1/2? [38.1 mm] minimum. ordering information tc 1.0 35 c3 a* m model capacitance in f dc voltage rating at + 85 c case code lead configuration capacitance tolerance c = polar n = nonpolar a = axial r = radial e = + 40, - 20 % m = 20 % k = 10 % j = 5 % example of part number code: tc1.0-35c3am * to complete part number in rating tables, add a or r. change suffix if special capac itance tolerance is required.
document number: 43005 for technical questions, contact: tantalum@vishay.com www.vishay.com revision: 12-sep-07 2 tc subminiature, leaded soli d tantalum capacitors polar or non-polar vishay sprague dimensions in inches [millimeters] case code l max w max t max e e tol d cx 0.075 [1.91] 0.050 [1.27] 0.040 [1.02] 0.030 [0.76] 0.015 [0.38] 0.007 [0.18] c0 0.100 [2.54] 0.050 [1.27] 0.040 [1.02] 0.030 [0.76] 0.015 [0.38] 0.007 [0.18] c1 0.125 [3.18] 0.070 [1.78] 0.040 [1.02] 0.050 [1.27] 0.015 [0.38] 0.010 [0.25] c2 0.165 [4.19] 0.120 [3.05] 0.070 [1.78] 0.100 [2.54] 0.020 [0.51] 0.010 [0.25] c3 0.225 [5.72] 0.185 [4.70] 0.075 [1.91] 0.150 [3.81] 0.020 [0.51] 0.010 [0.25] c4 0.290 [7.37] 0.220 [5.59] 0.110 [2.79] 0.180 [4.57] 0.025 [0.64] 0.016 [0.41] c5 0.310 [7.87] 0.230 [5.84] 0.130 [3.30] 0.200 [5.08] 0.025 [0.64] 0.016 [0.41] c6 0.475 [12.07] 0.375 [9.53] 0.150 [3.81] 0.300 [7.62] 0.025 [0.64] 0.016 [0.41] case code la max lr max w max t max e max e tol d n1 0.220 [5.59] 0.180 [4.57] 0.125 [3.18] 0.125 [3.18] 0.100 [2.54] 0.020 [0.51] 0.010 [0.25] n2 0.280 [7.11] 0.240 [6.10] 0.140 [3.56] 0.180 [4.57] 0.100 [2.54] 0.025 [0.64] 0.010 [0.25] n3 0.370 [9.40] 0.315 [8.00] 0.180 [4.57] 0.220 [5.59] 0.150 [3.81] 0.025 [0.64] 0.016 [0.41] n4 0.390 [9.91] 0.335 [8.51] 0.230 [5.84] 0.230 [5.84] 0.180 [4.57] 0.025 [0.64] 0.016 [0.41] polar style non polar style tolerance dot radial d axial e w d l l (+) (+) polarity dot 2nd dot 1st dot 1st dot 2nd dot tolerance dot (-) 3rd dot 3rd dot t the 3rd dot is on the end of the cx size w t red epoxy l axial radial t w d d lr w t la tolerance dot 1st dot 3rd dot 1st dot 3rd dot 2nd dot tolerance dot 2nd dot e
tc vishay sprague subminiature, leaded soli d tantalum capacitors polar or non-polar www.vishay.com for technical questi ons, contact: tantalum@vishay.com document number: 43005 3 revision: 12-sep-07 standard ratings - polar capacitors capacitance (f) max df (%) max. dcl at + 25 c (a) case code pa rt number 2 wvdc at + 85 c 0.47 10 0.5 c0 tc.47-2c0*m 0.68 10 0.5 c0 tc.68-2c0*m 1.0 10 0.5 c0 tc1.0-2c0*m 2.2 10 0.5 c1 tc2.2-2c1*m 10 10 0.5 c2 tc10-2c2*m 33 10 1.0 c3 tc33-2c3*m 100 15 2.0 c4 tc100-2c4*m 150 15 3.0 c5 tc150-2c5*m 470 20 9.0 c6 tc470-2c6*m 3 wvdc at + 85 c 1.5 10 0.5 c1 tc1.5-3c1*m 6.8 10 0.5 c2 tc6.8-3c2*m 22 10 1.0 c3 tc22-3c3*m 68 10 2.0 c4 tc68-3c4*m 100 10 3.0 c5 tc100-3c5*m 330 20 9.0 c6 tc330-3c6*m 4 wvdc at + 85 c 0.33 10 0.5 c0 tc.33-4c0*m 1.0 8 0.5 c1 tc1.0-4c1*m 4.7 8 0.5 c2 tc4.7-4c2*m 15 8 1.0 c3 tc15-4c3*m 47 8 2.0 c4 tc47-4c4*m 68 8 3.0 c5 tc68-4c5*m 220 15 9.0 c6 tc220-4c6*m 6 wvdc at + 85 c 0.22 10 0.5 c0 tc.22-6c0*m 0.68 6 0.5 c1 tc.68-6c1*m 3.3 6 0.5 c2 tc3.3-6c2*m 10 6 1.0 c3 tc10-6c3*m 33 6 2.0 c4 tc33-6c4*m 47 6 3.0 c5 tc47-6c5*m 150 10 9.0 c6 tc150-6c6*m 10 wvdc at + 85 c 0.0010 10 0.5 c0 tc.0010-10c0*e 0.0010 10 0.5 c1 tc.0010-10c1*e 0.0015 10 0.5 c0 tc.0015-10c0*e 0.0015 10 0.5 c1 tc.0015-10c1*e 0.0022 10 0.5 c0 tc.0022-10c0*e 0.0022 10 0.5 c1 tc.0022-10c1*e 0.0033 10 0.5 c0 tc.0033-10c0*e 0.0033 10 0.5 c1 tc.0033-10c1*e 0.0047 10 0.5 c0 tc.0047-10c0*e 0.0047 10 0.5 c1 tc.0047-10c1e 0.15 10 0.5 c0 tc.15-10c0*m 0.47 6 0.5 c1 tc.47-10c1*m 2.2 6 0.5 c2 tc2.2-10c2*m 6.8 6 1.0 c3 tc6.8-10c3*m 22 6 2.0 c4 tc22-10c4*m 33 6 3.0 c5 tc33-10c5*m 100 8 9.0 c6 tc100-10c6*m *add a for axial, r for radial
document number: 43005 for technical questions, contact: tantalum@vishay.com www.vishay.com revision: 12-sep-07 4 tc subminiature, leaded solid tantalum capacitors polar or non-polar vishay sprague standard ratings - polar capacitors capacitance (f) max df (%) max. dcl at + 25 c (a) case code part number 15 wvdc at + 85 c 0.10 10 0.5 c0 tc.10-15c0*m 0.33 6 0.5 c1 tc.33-15c1*m 1.5 6 0.5 c2 tc1.5-15c2*m 15 6 2.0 c4 tc15-15c4*m 22 6 3.0 c5 tc22-15c5*m 68 8 9.0 c6 tc68-15c6*m 20 wvdc at + 85 c 0.033 10 0.5 c0 tc.033-20c0*e 0.033 6 0.5 c1 tc.033-20c1*e 0.047 10 0.5 c0 tc.047-20c0*e 0.047 6 0.5 c1 tc.047-20c1*e 0.068 10 0.5 c0 tc.068-20c0*e 0.068 6 0.5 c1 tc.068-20c1*e 0.10 6 0.5 c1 tc.10-20c1*m 0.15 6 0.5 c1 tc.15-20c1*m 0.22 6 0.5 c1 tc.22-20c1*m 1.0 6 0.5 c2 tc1.0-20c2*m 3.3 6 1.0 c3 tc3.3-20c3*m 4.7 6 1.0 c3 tc4.7-20c3*m 10 6 2.0 c4 tc10-20c4*m 15 6 3.0 c5 tc15-20c5*m 47 8 9.0 c6 tc47-20c6*m 25 wvdc at + 85 c 0.68 6 0.5 c2 tc.68-25c2*m 2.2 6 1.0 c3 tc2.2-25c3*m 6.8 6 2.0 c4 tc6.8-25c4*m 10 6 3.0 c5 tc10-25c5*m 33 6 9.0 c6 tc33-25c6*m 35 wvdc at + 85 c 0.22 6 0.5 c2 tc.22-35c2*m 0.33 6 0.5 c2 tc.33-35c2*m 0.47 6 0.5 c2 tc.47-35c2*m 0.68 6 1.0 c3 tc.68-35c3*m 1.0 6 1.0 c3 tc1.0-35c3*m 1.5 6 1.0 c3 tc1.5-35c3*m 2.2 6 2.0 c4 tc2.2-35c4*m 3.3 6 2.0 c4 tc3.3-35c4*m 4.7 6 2.0 c4 tc4.7-35c4*m 6.8 6 3.0 c5 tc6.8-35c5*m 10 6 9.0 c6 tc10-35c6*m 15 6 9.0 c6 tc15-35c6*m 22 6 9.0 c6 tc22.35c6*m 50 wvdc at + 85 c 0.15 6 0.5 c2 tc.15-50c2*m 4.7 6 3.0 c5 tc4.7-50c5*m 6.8 6 9.0 c6 tc6.8-50c6*m *add a for axial, r for radial
tc vishay sprague subminiature, leaded soli d tantalum capacitors polar or non-polar www.vishay.com for technical questi ons, contact: tantalum@vishay.com document number: 43005 5 revision: 12-sep-07 standard ratings - non-polar capacitors capacitance (f) max df (%) max. dcl at + 25 c (a) case code pa rt number 2 wvdc at + 85 c 4.7 10 0.5 n1 tc4.7-2n1*m 15 10 1.0 n2 tc15-2n2*m 47 15 2.0 n3 tc47-2n3*m 68 15 3.0 n4 tc68-2n4*m 3 wvdc at + 85 c 3.3 10 0.5 n1 tc3.3-3n1*m 10 10 1.0 n2 tc10-3n2*m 33 10 2.0 n3 tc33-3n3*m 47 10 3.0 n4 tc47-3n4*m 4 wvdc at + 85 c 2.2 8 0.5 n1 tc2.2-4n1*m 6.8 8 1.0 n2 tc6.8-4n2*m 22 8 2.0 n3 tc22-4n3*m 33 8 3.0 n4 tc33-4n4*m 6 wvdc at + 85 c 1.5 6 0.5 n1 tc1.5-6n1*m 4.7 6 1.0 n2 tc4.7-6n2*m 15 6 2.0 n3 tc15-6n3*m 22 6 3.0 n4 tc22-6n4*m 10 wvdc at + 85 c 1.0 6 0.5 n1 tc1.0-10n1*m 3.3 6 1.0 n2 tc3.3-10n2*m 10 6 2.0 n3 tc10-10n3*m 15 6 3.0 n4 tc15-10n4*m 15 wvdc at + 85 c 0.68 6 0.5 n1 tc.68-15n1*m 6.8 6 2.0 n3 tc6.8-15n3*m 10 6 3.0 n4 tc10-15n4*m 20 wvdc at + 85 c 0.47 6 0.5 n1 tc.47-20n1*m 1.5 6 1.0 n2 tc1.5-20n2*m 2.2 6 1.0 n2 tc2.2-20n2*m 4.7 6 2.0 n3 tc4.7-20n3*m 6.8 6 3.0 n4 tc6.8-20n4*m 25 wvdc at + 85 c 0.33 6 0.5 n1 tc.33-25n1*m 1.0 6 1.0 n2 tc1.0-25n2*m 3.3 6 2.0 n3 tc3.3-25n3*m 4.7 6 3.0 n4 tc4.7-25n4*m 35 wvdc at + 85 c 0.10 6 0.5 n1 tc.10-35n1*m 0.15 6 0.5 n1 tc.15-35n1*m 0.22 6 0.5 n1 tc.22-35n1*m 0.33 6 1.0 n2 tc.33-35n2*m 0.47 6 1.0 n2 tc.47-35n2*m 0.68 6 1.0 n2 tc.68-35n2*m 1.0 6 2.0 n3 tc1.0-35n3*m 50 wvdc at + 85 c 2.2 6 3.0 n4 tc2.2-50n4*m *add a for axial, r for radial
document number: 43005 for technical questions, contact: tantalum@vishay.com www.vishay.com revision: 12-sep-07 6 tc subminiature, leaded solid tantalum capacitors polar or non-polar vishay sprague marking tc capacitors case sizes c3 - c6 and n2 - n4 are print marked: - capacitance is in picofarads - 1st and 2nd digits are significant figures - 3rd digit indicates the number of zeros. all other case sizes are have color dot marking: capacitance color digit in picofarads, indicated by 3 dots. black 0 1st and 2nd dot give brown 1 the significant digits. red 2 3rd dot indicates the number orange 3 of zeros. yellow 4 color dot location is shown on green 5 capacitance tolerance color tolerance the dimensional sketches. blue 6 is indicated by a dot on the gold 5 % black dot is omitted on black sleeve. violet 7 side of the case. silver 10 % grey 8 black dot is omitted. none 20 % white 9 none + 40 %/- 20 % the positive lead is indicated by a color dot of red epoxy on the unit. e.g. yellow-violet-green = 4 700 000 pf = 4.7 f
tc vishay sprague subminiature, leaded soli d tantalum capacitors polar or non-polar www.vishay.com for technical questi ons, contact: tantalum@vishay.com document number: 43005 7 revision: 12-sep-07 performance and reliability the capacitors are tested in accordance with mil-prf- 49137, with specific requirements as follows: temperature stability: when tested per mil-prf-49137/6, capacitance shall be within 15 % at - 55 c and 85 c, and 10 % at 25 c after exposure to temperature extremes. df shall be within 200 % of initial limit at - 55 c, 150 % of initial limit at 85c, and meet the initial at 25 c. dcl shall be within 10 x initial limit at 85 c, and meet the initial limit at 25 c. moisture resistance: (per method 106 of mil-std-202) after 10 cycles of 24 hours at 25 c to 65 c and 80 - 98 % rh; capacitance shall be within 15 % of initial value, df within 1.5 x initial limit and leakage within 3 x initial limit. life: (per method 108 of mil-std-202) after 1000 hours at 85 c and rated voltage; capacitance shall be within 10 % of initial limit, df within initial limits, and leakage within 200 % of initial limit. surge voltage: (per mil-prf-49317) after 1000 cycles at 85 c and 1.3 x wvdc; capacitance shall be within 10 % of initial limit, df and leakage within initial limits. resistance to soldering heat: (per method 210 0f milstd- 202, condition b) after immersion in 260 c molten solder to within a 1/4? of the body of the unit, there shall be no evidence of mechanical or electrical degradation. solderability: (per method 208 of mil-std-202) after dipping leads in 235 c molten solder to within 0.125? of the body of the unit, the solder shall cover 95 % of the lead surface. terminal strength: (per method 211 of mil-std-202) after the following test there shall be no loosening of the terminals or permanent damage to the terminals. test condition a: (pull test) 0.010 " leads withstand 1 pound, 0.016 " leads 2 pounds and 0.007 " leads 1/2 pound. test condition c: (bend test) all leads shall wit hstand 3 - 90 bends with a 1/2 pound applied force. capacitance vs. temperature impedance vs. frequency leakage current - temperature + 10 + 5 0 - 5 -10 - 40 - 10 + 25 + 100 + 85 (mfd-wvdc) typical 1 h - 20 v 100 f - 10 v 100 f - 10 v specification specification change in capacitance % temperature c 100 500 1 2 5 10 20 50 100 500 1 2 5 10 hz khz frequency khz mhz impedance- (mfd-wvdc) 0.1 0.2 0.5 1.0 2.0 5.0 10 20 50 100 200 500 1k 2k 5k 10k 0.047 f - 20 v 0.047 f - 20 v 0.047 f - 35 v 0.047 f - 50 v 0.047 f - 35 v 0.47 f - 10 v 0.47 f - 20 v 0.47 f - 20 v 1.0 0.1 0.01 - 40 - 10 0 + 85 + 20 (mfd-wvdc) temperature c d.c.leakage current (a) 1f - 20 v 100 f - 10 v
legal disclaimer notice vishay document number: 91000 www.vishay.com revision: 08-apr-05 1 notice specifications of the products displayed herein are subjec t to change without notice. vishay intertechnology, inc., or anyone on its behalf, assume s no responsibility or liability fo r any errors or inaccuracies. information contained herein is intended to provide a product description only. no license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document. except as provided in vishay's terms and conditions of sale for such products, vishay assumes no liability whatsoever, and disclaims any express or implied warranty, relating to sale and /or use of vishay products including liab ility or warranties relating to fitness for a particular purpose, merchantability, or infringement of any patent, copyrigh t, or other intellectual property right. the products shown herein are not designed for use in medical, life-saving, or life-sustaining applications. customers using or selling these products for use in such applications do so at their own risk and agree to fully indemnify vishay for any damages resulting from such improper use or sale.
|
